Lenovo 6528 Manual do Utilizador descarregar pdf (Página 68)

1. Touch the static-protective package that contains the drive to any unpainted

metal surface on the server; then, remove the drive from the package and place

it on a static-protective surface.

2. Make sure that the drive tray handle is in the open position.

3. Align the drive assembly with the guide rails in the bay; then, carefully slide the

drive assembly 1 into the drive bay until the drive stops.

4. Rotate the drive tray handle to the closed position 2.

5. Check the hard disk drive status indicator to make sure that the hard disk drive

is operating correctly. (You might have to restart the server for the drive to be

recognized.) If the amber hard disk drive status LED for a drive is lit

continuously, it indicates that the drive is faulty and must be replaced. If the

green hard disk drive activity LED is flashing, this indicates that the drive is

being accessed.

Note: If the server is configured for RAID operation using a ServeRAID

controller, you might have to reconfigure the disk arrays after you replace hard

disk drives. See the ServeRAID documentation for additional information about

RAID operation.

6. Install the lower bezel (see “Installing the lower bezel” on page 36).

7. Lock the side cover.

52 ThinkServer TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530: Installation and User Guide

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 215 216

Sem comentários

Lenovo 6528 Manual do Utilizador Página 68