Lenovo 6528 Manual do Utilizador descarregar pdf (Página 90)

Installing the rear system fan

Attention:

v Replace a failed fan within 48 hours.

v To ensure proper cooling and airflow, do not operate the server for more than 30

minutes with the side cover removed.

To install the rear system fan, complete the following steps:

1. The replacement fan comes with the rubber grommets installed 1; however,

they might have come out during shipment. If any of the rubber grommets are

missing from the fan, install them on the fan before you continue. Use

needle-nosed pliers to pull the grommets through the holes in the fan.

2. Position the fan 2 so that the grommets protrude through the holes in the

chassis; then, use needle-nosed pliers to pull the grommets through the holes

from outside the chassis.

3. Connect the fan cable to the system board (see “System-board internal

connectors” on page 19 for the location of the rear fan connector).

4. Install any adapters that you removed (see “Installing an adapter” on page 57).

5. Install the side cover (see “Installing the side cover” on page 33).

6. Lock the side cover if you unlocked it during removal.

7. Reconnect the external cables and power cords; then, turn on the attached

devices and turn on the server.

74 ThinkServer TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530: Installation and User Guide

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 215 216

Sem comentários

Lenovo 6528 Manual do Utilizador Página 90