Lenovo ThinkServer RD210 Manual do Utilizador descarregar pdf (Página 6)

To remove the server from the rack, disconnect the

cables from the rear of the server. Push the locking

levers 1 forward, lift the front of the server 2

up, and then pull the server out of the rack 3.

To disengage the slide rails from the rear of the

rack, push in the pins 1 and 2 and push back

on the rail 3.

To remove the slide rails from the front of the rack,

push up the front tab 1 and slide out the front

latch 2. Push in the lower pin 3 and lift up

slightly on the front of the slide rail 4. Remove

the slide rail from the rack.

To remove the server from the rack, reverse these instructions. You might find it easier to disassemble the

cable-management arm before you remove the server from the rack. Store this information with your

server documentation for future use.

1 2 3 4 5 6 7

Sem comentários

Lenovo ThinkServer RD210 Manual do Utilizador Página 6