Lenovo IdeaPad S9e -FR Manual do Utilizador

IdeaPad S9e, S10e, and S10 Hard ware Maintenance Manual

General safety Follow these rules to ensure general safety: v Observe good housekeeping in the area of the machines during and af

Applying labels to the base cover:The new base cover FRU is shipped with a kit containing labels of several kinds. When you repla

2010 LCD front bezel For access, remove this FRU: v “1010 Battery pack” on page 57 Table 29. Removal steps of LCD front bezel 21

2020 Hinges For access, remove these FRUs in order: v “1010 Battery pack” on page 57 v “1030 Hard disk drive (HDD)” on page 5

Table 30. Removal steps of hinges (continued) Remove the hinges from the LCD rear cover. 222233 Step Screw (quantity) Color Torque 2

2030 LCD panel and LCD cable For access, remove these FRUs in order: v “1010 Battery pack” on page 57 v “1030 Hard disk drive

Table 31. Removal steps of LCD panel and LCD cable (continued) 2 Remove the LCD brackets from the LCD panel. 333344 Step Screw (qua

Table 31. Removal steps of LCD panel and LCD cable (continued) IdeaPad S9e and S10e: Turn the LCD panel over, and then remove th

Table 31. Removal steps of LCD panel and LCD cable (continued) IdeaPad S10: Turn the LCD panel over, and then remove the LCD cab

2040 Integrated camera, camera cable, and LCD rear cover assembly (for IdeaPad S9e and S10e) For access, remove these FRUs in order

Table 32. Removal steps of Integrated camera, camera cable, and LCD rear cover assembly (for IdeaPad S9e and S10e) (continued) 34 Wh

Electrical safety Observe the following rules when working on electrical equipment. v Find the room emergency power-off (EPO) switc

2050 Integrated camera, camera cable, and LCD rear cover assembly (for IdeaPad S10) For access, remove these FRUs in order: v “101

Table 33. Removal steps of Integrated camera, camera cable, and LCD rear cover assembly (for IdeaPad S10) (continued) 34 When install

Locations Front view 1 Integrated camera 2 Status indicatorsNote: For the description of each indicator, see “Status indicators” o

Bottom view 1 Battery pack latch - spring loaded 2 Battery pack 3 Battery pack latch - manual 4 AC power connector 5 Exter

Parts list This section contains following lists of the service parts. v “Overall” on page 107 v “LCD FRUs” on page 114 v “Ke

Overall 1234910a12111314151617188756 IdeaPad S9e, S10e, and S10 107

Table 34. Parts list—Overall No. FRU FRU no. RoHS ID CRU ID a See “Miscellaneous parts” on page 123. 1 LCD unit (see “LCD FRUs” on

Table 34. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 4 System board with Intel ATOM Processor N270 (1.6 GHz) witho

Table 34. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 8 Bluetooth daughter card (BDC-2.1) v 4068-CTO, 24x, 27x, 29

Table 34. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 9 Battery pack, 3 cell, white v 4068-CTO, 2Jx, 2Px, 2Qx, 3

v Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such

Table 34. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 10 SATA hard disk drive, 160 GB, 9.5 mm, 5,400 rpm v 4068

Table 34. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 12 Base cover assembly, pink for 4187 v 4187-CTO 45N5111 R

LCD FRUs In IdeaPad S9e, S10e, and S10, there are following types of LCDs. v “8.9-in. WSVGA TFT” on page 115 v “10.1-in. WSVGA

8.9-in. WSVGA TFT Table 35. Parts list—8.9-in. WSVGA TFT No. FRU FRU no. RoHS ID CRU ID b - e See “Miscellaneous parts” on page 12

Table 35. Parts list—8.9-in. WSVGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 5 LCD rear cover assembly, blue with wireless LAN

10.1-in. WSVGA TFT Table 36. Parts list—10.1-in. WSVGA TFT No. FRU FRU no. RoHS ID CRU ID b - e See “Miscellaneous parts” on page

Table 36. Parts list—10.1-in. WSVGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 2 LCD panel, 10.1-in. WSVGA for IdeaPad S10e v

Table 36. Parts list—10.1-in. WSVGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 5 LCD rear cover assembly, white with wireless LA

Keyboard Keyboard (white) v 4068-CTO, 2Cx, 2Dx, 2Ex, 2Jx, 2Kx, 2Lx, 2Mx, 33x, 36x, 39x, 3Cx, 3Fx, 43x, 44x, 47x, 48x, 4Bx, 4Cx,

Table 37. Parts list—Keyboard (white) Language P/N (white) RoHS ID CRU ID Arabic 42T4244 R ** Belgian 42T4245 Brazilian Portuguese 42T42

Safety inspection guide The purpose of this inspection guide is to assist you in identifying potentially unsafe conditions. As each

Keyboard (black) v 4068-CTO, 22x, 23x, 24x, 27x, 28x, 29x, 2Ax, 2Bx, 2Fx, 2Gx, 2Hx, 32x, 35x, 38x, 3Bx, 3Ex, 3Hx, 3Jx, 42x, 46x

Miscellaneous parts Table 39. Parts list—Miscellaneous parts FRU P/N RoHS ID CRU ID Screw kit for IdeaPad S9e and S10e: v M2 × 2.5

Table 39. Parts list—Miscellaneous parts (continued) FRU P/N RoHS ID CRU ID Misc parts kit (red) for IdeaPad S9e and S10e: v (a) HD

Power cords An IdeaPad power cord for a specific country or region is usually available only in that country or region: Table 41.

Recovery discs Windows XP Home DVDs for HDD Windows XP Home for HDD is preinstalled as the operating system in the following models

Windows XP Home DVDs for SSD Windows XP Homel for SSD is preinstalled as the operating system in the following models: v 4068-CTO

SUSE Linux Enterprise Desktop 10 DVDs for HDD SUSE Linux Enterprise Desktop 10 for HDD is preinstalled as the operating system in

SUSE Linux Enterprise Desktop 10 DVDs for SSD SUSE Linux Enterprise Desktop 10 for SSD is preinstalled as the operating system in

Common service tools Table 47. Parts list—Common service tools Tool P/N Screwdriver kit 95F3598 1/4″ drive spinner handle 1650840 1/4″

Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Len

Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) s

vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measuremen

Part Number: 45N3684_01 (1P) P/N: 45N3684_01

Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian,

Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, r

Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or

Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polar

Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the

Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’é

Safety notice 8 DANGER Before removing any FRU, power off the computer, unplug all power cords from electrical outlets, remove the

Laser compliance statement Some models of IdeaPad computer are equipped from the factory with an optical storage device such as a C

A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode.

16 IdeaPad S9e, S10e, and S10 Hardware Maintenance Manual

Important service information This chapter presents following important service information: v “Strategy for replacing FRUs” – “Strat

v If you are instructed to replace a FRU but the replacement does not correct the problem, reinstall the original FRU before yo

Strategy for replacing FRUs for CTO, CMV, and GAV Product definition Dynamic Configure To Order (CTO) This provides the ability for

v Business Partners using Eclaim will access PEW when performing Entitlement Lookup. Business Partners will enter Loc ID, MT and

Important information about replacing RoHS compliant FRUs RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Eq

IdeaPad S9e, S10e, and S10 Hard ware Maintenance Manual

22 IdeaPad S9e, S10e, and S10 Hardware Maintenance Manual

General checkout This chapter presents following information: v “What to do first” on page 24 v “Checkout guide” on page 25 –

What to do first When you do return a FRU, you must include the following information in the parts exchange form or parts return

Checkout guide Use the following procedures as a guide in identifying and correcting problems with the IdeaPad computer. Note: The di

Diagnostics using PC-Doctor for DOS The IdeaPad computer has a test program called PC-Doctor for DOS (hereafter called PC-Doctor.) Yo

The options on the test menu are as follows: Diagnostics Interactive Tests v Run Normal Test v Run Quick Test v CPU/Coprocesso

v PCI Information v PNPISA Info v SMBIOS Info v VESA LCD Info v Hardware Events LogUtility v Run External Tests v Surfac

Power system checkout To verify a symptom, do the following: 1. Turn off the computer. 2. Remove the battery pack. 3. Connect

Perform operational charging. If the battery status indicator or icon does not turn on, remove the battery pack and let it return

4. Remove the backup battery (see “1110 Fan, backup battery, and system board” on page 77). 5. Measure the voltage of the back

Note Before using this information and the product it supports, be sure to read the general information under “Notices” on page 131

32 IdeaPad S9e, S10e, and S10 Hardware Maintenance Manual

Related service information This chapter presents following information: v “Restoring the factory contents by using Product Recovery

10. When the recovery process is complete, the Welcome to Microsoft Windows screen is displayed. Follow the instructions on the s

For how to remove the HDP, see “How to remove the hard-disk password.” Supervisor password A supervisor password (SVP) protects the

How to remove the supervisor password To remove an SVP, do the following: (A) If an SVP is know to the servicer: 1. Turn on th

Power management To reduce power consumption, the computer has three power management modes: screen blank, standby, and hibernation. Sc

Also, in either of the following events, the computer automatically returns from standby mode and resumes operation: v The ring in

Symptom-to-FRU index This section contains following information: v “Numeric error codes” v “Error messages” on page 41 v “Beep s

Table 1. Numeric error codes (continued) Symptom or error FRU or action, in sequence 0231System RAM Fails at offset: 1. DIMM. 2.

Error messages Table 2. Error messages Symptom or error FRU or action, in sequence Device address conflict. 1. Load “Setup Default

Contents About this manual . . . . . . . . . .v Safety information . . . . . . . . . .1 General safety . . . . . . .

Beep symptoms Table 3. Beep symptoms Symptom or error FRU or action, in sequence One beep and a blank, unreadable, or flashing LCD.

LCD-related symptoms Table 5. Minimum quantity of defective pixels required for LCD replacement in IdeaPad S9e, S10e, and S10 LCD r

Intermittent problems Intermittent system hang problems can be due to a variety of causes that have nothing to do with a hardware

IdeaPad S9e, S10e, and S10 This chapter presents following product-specific service references and product-specific parts information. v

Specifications The following table lists the specifications of the IdeaPad S9e, S10e, and S10 : Table 7. Specifications Feature Descr

Status indicators The system status indicators show the status of the computer, as follows: 1 2 3 4 5 6 Table 8. Status indicators

Table 8. Status indicators (continued) Indicator Meaning 3 Drive in use Blue: Data is being read from or written to the hard disk

FRU tests The following table shows the test for each FRU. Table 9. FRU tests FRU Applicable test System board 1. Diagnostics --&

Fn key combinations The following table shows the function of each combination of Fn with a function key. Table 10. Fn key combina

FRU replacement notices This section contains notices related to removing and replacing parts. Read this section carefully before repl

iv IdeaPad S9e, S10e, and S10 Hardware Maintenance Manual

Retaining serial numbers This section includes the following descriptions: v “Restoring the Product Name and the P/N (part number)

When you replace the system board, you must set the UUID on the new system board as follows: 1. Boot the system with DOS. 2.

Removing and replacing a FRU This section presents directions and drawings for use in removing and replacing a FRU. Be sure to obs

Before servicing IdeaPad S9e, S10e, and S10 Table 12. Before servicing IdeaPad S9e, S10, and S10e Removing the SIM card: Some model

Table 12. Before servicing IdeaPad S9e, S10, and S10e (continued) Notice on disconnecting the cable from flip-lock ZIF connector: Som

1010 Battery pack DANGER Table 13. Removal steps of battery pack Unlock the battery release lever 1. Holding the battery releas

1020 Wireless WAN/SIM door For access, remove this FRU: v “1010 Battery pack” on page 57 Table 14. Removal steps of Wireless WAN/

1030 Hard disk drive (HDD) For access, remove this FRU: v “1010 Battery pack” on page 57 Table 15. Removal steps of HDD Note: L

Table 15. Removal steps of HDD (continued) Step 3 is only for IdeaPad S10. For IdeaPad S9e and S10e, skip step 3. 43 5 60 Id

Table 15. Removal steps of HDD (continued) When installing: 1. Align the HDD as shown in this figure, and then place it downward.

About this manual This manual contains service and reference information for the following IdeaPad™ products. IdeaPad S9e and S10e MT

1040 DIMM For access, remove this FRU in order: v “1010 Battery pack” on page 57 Table 16. Removal steps of dimm Note: Loosen th

1050 PCI Express Mini Card for wireless WAN (for IdeaPad S10) For access, remove these FRUs in order: v “1010 Battery pack” on p

Table 17. Removal steps of PCI Express Mini Card for wireless WAN (for IdeaPad S10) (continued) 3 When installing: Plug the black c

1060 Palm rest assembly For access, remove this FRU in order: v “1010 Battery pack” on page 57 Table 18. Removal steps of palm

Table 18. Removal steps of palm rest assembly (continued) 4756 Turn the palm rest over, and then disconnect the cable from the fli

Table 18. Removal steps of palm rest assembly (continued) When installing: 1. Attach the touch pad cable to the flip-lock ZIF conn

1070 PCI Express Mini Card for wireless LAN For access, remove these FRUs in order: v “1010 Battery pack” on page 57 v “1060

Table 19. Removal steps of PCI Express Mini Card for wireless LAN (continued) 3 When installing: Plug the black cable into the jac

1080 Bluetooth daughter card and Bluetooth cable For access, remove these FRUs in order: v “1010 Battery pack” on page 57 v “10

Table 20. Removal steps of Bluetooth daughter card and Bluetooth cable (continued) 4 When installing: Make sure that the connector 

vi IdeaPad S9e, S10e, and S10 Hardware Maintenance Manual

1090 Keyboard For access, remove this FRU in order: v “1010 Battery pack” on page 57 v “1030 Hard disk drive (HDD)” on page 5

Table 21. Removal steps of keyboard (continued) 3422 Step Screw (quantity) Color Torque 2 M2 × 2.5 mm, wafer-head, nylon-coated (2)

Table 21. Removal steps of keyboard (continued) When installing: Make sure that the keyboard edges a are under the frame as shown

1100 Keyboard bezel For access, remove these FRUs in order: v “1010 Battery pack” on page 57 v “1030 Hard disk drive (HDD)” on

Table 22. Removal steps of keyboard bezel (continued) 3654 Step Screw (quantity) Color Torque 3-6 M2 × 6 mm, wafer-head, nylon-co

1110 Fan, backup battery, and system board For access, remove these FRUs in order: v “1010 Battery pack” on page 57 v “1020 Wi

Table 23. Removal steps of fan assembly Following components soldered on the system board are extremely sensitive. When you service

Table 23. Removal steps of fan assembly (continued) 2134 Step Screw (quantity) Color Torque 1 M2 × 4 mm, wafer-head, nylon-coated

Table 23. Removal steps of fan assembly (continued) Step 5 is only for IdeaPad S10. For IdeaPad S9e and S10e, skip step 5. 65

Table 23. Removal steps of fan assembly (continued) In step 11 , remove the system board and the fan assembly together from the

Safety information This chapter presents following safety information that you need to be familiar with before you service a IdeaPad

Table 23. Removal steps of fan assembly (continued) 45 When installing: Make sure that the fan connector is attached to the system

DANGERTable 24. Removal steps of backup battery and system board 21 When installing: Make sure that the battery connector is attache

1120 Speaker assembly For access, remove these FRUs in order: v “1010 Battery pack” on page 57 v “1020 Wireless WAN/SIM door” o

1130 Second fan assembly (for IdeaPad S10) For access, remove these FRUs in order: v “1010 Battery pack” on page 57 v “1020 Wi

Table 26. Removal steps of second fan assembly (continued) 43333 Step Screw (quantity) Color Torque 3 M2 × 2.5 mm, wafer-head, waf

1140 LCD assembly (for IdeaPad S9e and S10e) For access, remove these FRUs in order: v “1010 Battery pack” on page 57 v “1020

Table 27. Removal steps of LCD assembly (for IdeaPad S9e and S10e) (continued) 33 When installing: Route the LCD cable (a), the

Applying labels to the base cover:The new base cover FRU is shipped with a kit containing labels of several kinds. When you repla

1150 LCD assembly (for IdeaPad S10) For access, remove these FRUs in order: v “1010 Battery pack” on page 57 v “1020 Wireless

Table 28. Removal steps of LCD assembly (for IdeaPad S10) (continued) 33 When installing: Route the LCD cable (a), the camera cab