Lenovo USB 2.0 CD-RW/DVD-ROM Combo II Drive Manual do Utilizador descarregar pdf (Página 17)

Configuration 1: self power (AC adapter) configuration

The Combo II Drive is usually used with the self power (AC adapter)

configuration.

Requirements

v Standard USB cable (shipped with this option); Part Number 40Y8704

v AC adapter (shipped with this option)

Specifications

Reading DVD media and reading and writing CD media are supported.

Connecting the Combo II Drive using configuration 1

Attention: If you are booting from the USB 2.0 CD-RW/DVD-ROM

Combo II drive, then the AC power adapter should be attached to the

USB 2.0 CD-RW/DVD-ROM Combo II drive prior to booting.

To connect the Combo II Drive to your system, complete the following procedure.

Refer to Figure 1-1 during installation.

1. Turn on your computer.

2. Insert the cable plug 1 into the USB connector of the drive.

3. Plug the standard USB connector 2 into the USB port of your computer.

4. Connect the AC adapter to the DC IN connector3 on the Combo II Drive.

Figure 1-1. Configuration 1: self power (AC adapter) configuration

Chapter 1. Combo II Drive quick install 1-3

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 73 74

Sem comentários

Lenovo USB 2.0 CD-RW/DVD-ROM Combo II Drive Manual do Utilizador Página 17